Critical Mineral Resources plc (CMRS) has released assay results from 15 recently completed diamond drillholes at its flagship Agadir Melloul copper-silver-gold project in central Morocco, with standout drillhole BH 189 returning 2.2 metres at 2.5% copper and 77 g/t silver from approximately 18 metres below surface. The infill and delineation drilling programme is designed to improve geological definition of the sediment-hosted copper mineralisation ahead of the company's maiden Mineral Resource Estimate. The near-surface nature of the mineralisation is central to CMR's stated fast-track, low-capital development strategy, which the company says targets initial cashflow via concurrent engineering and permitting work.

Key Points

  • Critical Mineral Resources plc (CMRS) — London-listed copper-silver-gold explorer operating in central Morocco
  • Drillhole BH 189 returned 2.2m at 2.5% Cu and 77 g/t Ag from 18.35m depth, including 0.6m at 3.8% Cu and 90 g/t Ag
  • Results are from 15 diamond drillholes; the company's total database now covers 219 completed diamond holes for 9,244.30 metres
  • Investors should watch for the upcoming maiden Mineral Resource Estimate and a planned 2027 drill programme targeting the NNW fault structure

Infill Drilling at Agadir Melloul Tightens Spacing to 50 Metres to Support Maiden MRE

The latest drilling programme at Agadir Melloul focused on delineation and infill work, reducing drill spacing along a key section from 100 metres to 50 metres. This closer spacing is intended to improve the input data feeding into the geological model underpinning CMR's upcoming maiden Mineral Resource Estimate. The Agadir Melloul project covers approximately 65 square kilometres in the Western Anti-Atlas of central Morocco, located 250 kilometres southwest of Marrakech and 240 kilometres from the deep seaport of Agadir. The mineralisation is hosted in limestone, dolomite, and conglomerate formations and is described as laterally extensive, shallow, and gently dipping, with copper-bearing minerals including chalcopyrite, chalcocite, bornite, and malachite.

BH 189 Highlights Elevated Silver Grades Potentially Linked to NNW Regional Fault Structure

Beyond the copper intercepts, the announcement draws attention to notably elevated silver grades in drillhole BH 189, which returned 2.2 metres at 77 g/t silver alongside 2.5% copper from 18.35 metres depth. The company states this intercept appears coincident with a nearby semi-regional NNW-trending fault, which may represent a structural control not yet fully understood. Additional significant intercepts across the programme included 8.0 metres at 1.0% copper and 2 g/t silver in drillhole BHF 03, and 4.9 metres at 0.60% copper and 9 g/t silver in drillhole BH 192. CMR has confirmed it plans to drill-test the NNW structure during 2027 to assess its continuity and depth extension.

CMR's Low-Capex Development Path Relies on Near-Surface, Blanket-Style Deposit Geometry

Chief Executive Charles Long stated in the announcement that CMR's development strategy involves advancing engineering and permitting concurrently with ongoing drilling, describing this as the fastest and lowest-capital path to initial cashflow. The company attributes the viability of this fast-track approach directly to the near-surface, blanket-style character of the copper deposit, with mineralisation intersected at approximately 18 metres below surface in BH 189 and 40 metres in BH 192. Long noted the company would provide a further update on development progress shortly. The technical results were reviewed and verified by independent Competent Persons Mr James Hogg and Mr Lewis Harvey of Addison Mining Services, both Members of the Australian Institute of Geoscientists, in accordance with the JORC Code 2012.

Database Grows to Over 10,000 Metres Drilled as Assay Results Continue to Arrive

CMR's total drilling database now comprises 219 completed diamond holes for 9,244.30 metres and 28 reverse circulation holes for 880 metres, totalling 10,124.30 metres drilled to date, with 35 additional planned holes covering approximately 1,750 metres. Some 2,107 primary sample analyses have been received from Afrilab Morocco, an SGS-accredited laboratory, using standard four-acid digest and multi-element ICP analysis. The company notes that batches of drill samples continue to progress through the laboratory and further results will be released as they are received and interpreted. The absence of certified reference material insertion to date represents an identified quality-control gap, which CMR states it is addressing as part of ongoing procedural updates.