Rome Resources plc (AIM: RMR), a critical minerals explorer focused on the Democratic Republic of Congo and Canada, has announced maiden tin production at its Kalayi Tin Project in the DRC. The pilot mining operation has produced approximately 2,000kg of around 58.5% contained tin concentrate, equating to approximately 75% cassiterite, using simple sorting and sluicing methods alone. The company has also received a favourable Environmental Audit, a key step towards conversion from its current small-scale permit to a full Mining Licence. Investors will be watching progress on that licence conversion, which the company states is the primary constraint on scaling production.
Key Points
- Rome Resources plc (AIM: RMR) — DRC and Canada-focused critical minerals explorer
- Maiden tin production achieved at Kalayi Tin Project, DRC, with approximately 2,000kg of ~75% cassiterite concentrate produced on site
- Kalayi Inferred Resource stands at 0.46Mt at 1.47% tin, containing 6.76kt of tin — a 45% increase during 2026; tin currently trading at approximately $50,000 per tonne
- Investors should watch progress on full Mining Licence conversion and results from the forthcoming targeted drilling programme
Kalayi Pilot Mining Achieves 75% Cassiterite Concentrate via Sorting and Sluicing
The pilot operation at Kalayi commenced in June 2026 and has focused primarily on Adit #2, a horizontal tunnel driven approximately 12.8 metres into the hillside at 6.4 metres below ground. Ore mined from the adit is crushed and sluiced on site with no flotation, chemical treatment, or complex processing circuit required. A concentrate sample submitted to the regional government laboratory CEEC in Beni returned an average of 58.49% tin across fine and medium-grained components, equating to approximately 75% cassiterite. The approximately 2,000kg of concentrate produced to date is to be sold at a local facility in Walikale. The company reports no safety or environmental incidents to date.
Mining Licence Conversion Is the Key Constraint on Scaling Kalayi Production
The current operation is governed by the Kalayi PEPM, a small-scale mining exploitation permit that restricts production volumes. The announcement states that conversion to a full Mining Licence would remove this constraint, secure long-term tenure, and permit production at commercial scale. The project has received a favourable Environmental Audit, which the company describes as a condition for conversion. Rome Resources notes that because mineralisation runs from surface and the processing method is straightforward, the operation could be scaled materially once the full licence is in place. The company has stated it will update the market in due course on conversion progress. With tin trading at approximately $50,000 per tonne, the commercial significance of scaling is material.
Four Priority Drill Pads Targeting Deeper Extensions of KBDD025 and KBDD033 Intercepts
Alongside trial mining, Rome Resources has commenced construction of drill pads for the next phase of exploration at Kalayi. The first four priority pads will target the deeper extensions of drillholes KBDD025 and KBDD033, which returned downhole widths of 9.5 metres at 2.05% tin and 19.5 metres at 0.52% tin respectively — both described as remaining open at depth. The company's Inferred Resource currently stands at 0.46Mt at 1.47% tin for 6.76kt of contained tin, following a 45% increase announced in September 2026. Rome states that 20,000 tonnes of contained tin remains a realistic combined target, including potential from the southeastern extension and Mont Agoma. Three drilling units are on site and being maintained ready for restart.
Bisie North Strategic Discussions Continue Alongside Kalayi Development
Beyond Kalayi, Rome Resources states it continues to engage with potential strategic parties regarding the advancement and development of its Bisie North project. The announcement does not provide details of any specific parties, transaction structures, or timelines in relation to those discussions. Alphamin's tin processing infrastructure is noted to lie less than 10km from Kalayi, a logistical factor that may be relevant to any future strategic partnership. The company's XRF concentrate results remain subject to third-party assay verification and should not be treated as definitive pending completion of that quality assurance process, as the announcement explicitly states.




Please wait processing your request...