While primary aluminium moves around a record backwardation, the London Metal Exchange (LME) aluminium alloy price has not changed in November, a sign of how little Business the contract sees.
Market Overview
The LME aluminium alloy price did nothing last week, and that is itself the story. The alloy contract was quoted at $3,000 a tonne on 11, 12 and 13 November 2026, the same level recorded on 3, 4, 5 and 6 November.
Over the same days primary aluminium was anything but quiet. LME cash aluminium settled at $3,223.50 on 11 November, $3,155.50 on 12 November and $3,150.50 on 13 November. That puts alloy about $150 a tonne below primary cash metal, but only about $18 below primary three-month metal, which settled at $3,018.
Because there is no fresh news specific to the alloy contract, its direction is best understood through its parent markets: primary aluminium and secondary alloy in China.
Why the Price Has Not Moved
Aluminium alloy, used heavily for die-cast car parts and engine components, is made largely from scrap that is remelted with some primary metal. Its value tracks primary aluminium, less a discount that depends on scrap Supply and Demand from casters.
The LME alloy contract is thinly traded. When few trades take place, the published price tends to sit still rather than updating with every swing in primary aluminium. That is the most likely reason the $3,000 figure has stayed fixed.
The gap between alloy and primary cash is also distorted this month. Primary cash has been lifted by a record backwardation that reflects a squeeze on deliverable LME stock, a Factor that has little to do with the Economics of making alloy from scrap.
Measured against primary metal, the quote looks unusually stable. At $3,000, alloy is about 95% of primary cash aluminium and roughly 99% of the three-month price. In a normal market that ratio would shift as scrap availability and casting demand change, so a fixed quote across several days of volatile primary trading is a clear sign that the contract is indicative rather than actively priced.
Mixed Forces on Alloy
The forces acting on alloy are mixed. On one side, the primary aluminium three-month price slipped about 1% over the week to $3,018, and the outlook for outright aluminium has softened on bets about US interest rates and forecasts of a surplus. On the other side, a 50% US Section 232 Tariff and record Midwest premiums pushed US all-in aluminium costs above $5,340 a tonne earlier this year, which squeezed foundry margins and supported the value of scrap-based production.
Physical Signals from China
The clearest live signal comes from China, the world's largest alloy market. On 11 November, spot prices for ADC12, the main Chinese alloy grade, broadly fell by 200 to 400 yuan a tonne, and one widely used benchmark quote dropped 300 yuan as primary aluminium and alloy futures accelerated their decline. The most-traded cast aluminium alloy Futures Contract fell 1.91% that day.
Earlier in the month, on 4 November, limited demand growth and cost constraints had left ADC12 prices subdued. Weak demand plus falling primary prices usually pulls alloy lower with a lag.
Demand from the car industry is the main end market for alloy, which means casters are sensitive to both metal costs and vehicle production schedules. When primary prices fall, alloy buyers often delay purchases in the expectation of lower quotes, which can reduce transaction volumes further and keep published prices from updating. That pattern is consistent with what the LME table has shown across both weeks of November.
London-Listed Aluminium Exposure
London-listed producers of primary aluminium watch these price signals closely, even when the alloy contract is quiet. Rio Tinto (LSE:RIO) and South32 (LSE:S32) both produce aluminium, so the direction of primary prices has a direct effect on their results, while the alloy market is more relevant to Downstream recyclers and casters.
How It Could Play Out
The frozen LME number may not reflect where physical alloy would trade today. If a fresh trade prints, the risk appears skewed lower, given softer Chinese alloy prices and a weaker three-month primary price.
Die-casters and car-parts makers benefit from softer alloy prices, as they buy alloy ingot. Secondary smelters face pressure, since their scrap costs follow primary aluminium but they cannot always pass those costs on to customers.
In the coming week, the key items to follow are any change in the LME alloy quote, the direction of three-month primary aluminium, and the daily ADC12 price in China. Until the alloy contract trades more actively, the $3,000 figure is best read as an indicative level rather than a live market price. Producers such as Rio Tinto (LSE:RIO) will continue to take their cue from primary aluminium rather than from this contract.





_11_17_2026_07_15_10_609233.jpg)
Please wait processing your request...