Taiwan's largest rebar maker cut its steel price but did not cut what it pays for scrap, a squeeze that shows how firm raw-material costs remain in Asia.
Market Overview
Taiwan's scrap market is holding firm even as steel prices soften. The island's largest rebar producer trimmed its rebar list price by TWD 200 a tonne, about $6.10, for transactions over 9 to 13 November 2026. Its 13mm rebar is now offered at TWD 18,300 a tonne ex-works.
At the same time, the producer kept its buying price for local HMS 1&2 80:20 scrap unchanged at TWD 10,100 a tonne, a five-month high. At the Exchange Rate implied in that report, that is roughly $308 a tonne.
Fresh assessments of imported scrap delivered to Taiwan, which is what the LME Steel Scrap CFR Taiwan contract tracks, are less frequent than for larger markets. The latest widely reported figure was from 12 October, when US-origin HMS 80:20 scrap was quoted at $350 a tonne CFR Taiwan, up for a seventh straight week and the highest since late June. Japanese H2 scrap was $367 CFR at that time.
Why Scrap Costs Remain Firm
Taiwanese mills rely on a mix of local and imported scrap, and imports set the marginal price. Global scrap has been firm. In Turkey, the biggest buyer, imported HMS 80:20 held at $407 CFR in mid-November. In India, UK shredded offers reached $410 to $415 CFR on 16 November. US domestic scrap prices were expected to rise by $20 to $30 a tonne in November, which keeps US exporters' offers high.
Rebar Demand is the weak spot. Local mini-mills were in no hurry to raise prices in October because of lacklustre steel demand from end users, which has fed a wait-and-see mood. The largest producer raised rebar by about $6 in late October and rolled prices over in early November before cutting again this week.
The pattern of price changes over the past few weeks shows how cautious the market is. A rise of about $6 in late October was followed by a rollover and then a cut, which suggests that the producer has little confidence in a sustained recovery in demand. At the same time, holding the scrap buying price steady signals that it does not expect scrap costs to fall quickly, and that securing Supply is more important than saving a small amount on each tonne.
Squeeze on Mill Margins
The squeeze is visible in the producer's own numbers. The gap between its rebar price and its scrap buying price has narrowed from TWD 8,400 a tonne a week earlier to TWD 8,200 now. That spread is a rough measure of an electric arc mill's Margin before power and other costs.
Converted at the implied exchange rate, the producer's scrap price of about $308 a tonne sits roughly $42 below the last reported US Import price of $350 CFR, which helps explain why mills lean on local scrap when they can.
If rebar keeps sliding, mills will eventually push scrap prices lower too, both locally and in import negotiations. If global scrap keeps rising, they may be forced to raise rebar again despite weak demand.
Chinese billet is another factor. Cheap billet offers have competed with Taiwanese steel in the past, and with Chinese steel prices sliding, that competition could cap Taiwanese rebar further.
London-Listed Exposure to Asian Steel
Asian steel conditions matter to several London-listed companies. Vesuvius (LSE:VSVS) sells consumables to steel plants across Asia, so mill output and profitability in markets such as Taiwan influence demand for its products. Rio Tinto (LSE:RIO) supplies iron ore to Asian steelmakers, and the relative prices of scrap and ore-based metal affect the balance between the two production routes. When scrap is firm, ore-based production becomes comparatively more attractive, which can support demand for primary raw materials.
How It Could Play Out
Scrap suppliers, including US West Coast container exporters and Japanese sellers, benefit from the current level of prices. Taiwanese mini-mills face tighter margins and, eventually, construction firms could face higher costs if mills pass them on.
In the coming week, the key points to follow are the rebar producer's Monday pricing decision, fresh US and Japanese CFR Taiwan offers, and the direction of Turkish scrap. A cut in the scrap buying price would be the clearest sign that the Asian scrap market is turning, while a steady price alongside weaker rebar would indicate that mills are prepared to accept thinner margins for now. Vesuvius (LSE:VSVS) is one of the London-listed names that follows Asian mill activity.





_11_17_2026_07_15_10_609233.jpg)
Please wait processing your request...