Highlights
• Preliminary testing on about 300 kg of Molulu stockpile material delivered 74.13% acid-soluble copper recovery.
• The blended sample carried a head grade of 1.43% total copper across the material tested.
• The results support potential hydrometallurgical processing of the stockpile through heap leach and SX-EW routes, the company says.
• Next steps include offtake-partner testwork, an independent third-party review, updated 3D block modelling and follow-up drilling programmes.
A stockpile is only as valuable as the metal that can be pulled out of it, and Critical Metals (LSE:CRTM) now has a first measure for the material sitting at Molulu. A preliminary acid-soluble copper test on roughly 300 kg of stockpile material returned a Recovery Rate of 74.13%, giving the company an early read on how the copper might be processed and a set of clear next steps.
What the Test Measured
The testwork used about 300 kg of material drawn from the Molulu stockpile. Samples were blended to produce a head grade of 1.43% total copper, which formed the starting point for the recovery test.
The focus was acid-soluble copper, meaning the portion of copper that dissolves when the material is exposed to acid. The preliminary work returned acid-soluble copper recovery of 74.13%, the figure behind the headline result.
Acid consumption was also recorded as part of the test programme.
A Hydrometallurgical Route
The results support potential processing of the stockpile through hydrometallurgical methods. Two linked routes are referenced:
• heap leach, in which copper is dissolved from stacked material
• SX-EW (solvent extraction and electrowinning), which converts the copper in solution into metal
The update describes the work as preliminary, and the results set the direction for the next phase rather than a final flowsheet.
Four Steps Ahead
Critical Metals (LSE:CRTM) has outlined a programme to build on the preliminary findings:
• further testwork alongside a potential offtake partner
• an independent third-party review of the results
• updated 3D block modelling and extraction scheduling
• follow-up drilling designed to convert the stockpile into recoverable inventory
The offtake-partner testwork involves a potential partner directly in the technical programme. The independent review adds outside scrutiny to the numbers, while the modelling and scheduling work is intended to translate the test results into a picture of how the stockpile could be extracted over time.
Turning Stockpile Into Inventory
Follow-up drilling is the step aimed most directly at the stockpile itself. Its stated purpose is to convert the material into recoverable inventory, linking the recovery data from the test to a defined quantity of material that could be processed.
Taken together, the steps move the Critical Metals (LSE:CRTM) Molulu stockpile from a preliminary test result towards a more detailed technical basis for decisions on processing.
Understanding Head Grade and Recovery
Head grade is the average concentration of the metal in the material before processing, and recovery is the proportion of the metal that is extracted by the process. A head grade of 1.43% total copper with acid-soluble copper recovery of 74.13% describes both the starting material and the efficiency of the test. Acid-soluble copper dissolves in acid, which is why a hydrometallurgical route, in which metals are extracted using solutions, suits that portion of the copper.
The preliminary nature of the work is stressed in the update, which describes the results as setting the direction for the next phase rather than a final flowsheet. A flowsheet is the planned sequence of processing steps used to turn raw material into a saleable product, and a final version normally follows further testwork. The four next steps each address a different question. Testwork with a potential offtake partner explores whether the material suits a buyer's requirements, the independent review checks the results, the modelling and scheduling work considers how extraction could proceed over time, and the follow-up drilling aims to define the quantity of material. Readers following Critical Metals can look for later announcements describing the outcome of each of these steps and how they combine into a fuller technical picture of the Molulu stockpile.
Later announcements will show how the programme develops.






Please wait processing your request...