Highlights
• Richmond Hill Resources has completed four diamond drill holes totalling about 780 metres at Sakoose this season.
• Completed drilling represents roughly 56% of the planned Sakoose programme of about 1,400 metres in total.
• Geologists extended hole 4 by about 40 metres to roughly 260 metres after reviewing the drill core.
• The rig has moved on to a deeper planned hole, while logging and sampling continue ahead of assays.
Some 780 metres of diamond drilling is now complete at Sakoose, and Richmond Hill Resources (LSE:RHR) already has a fifth hole turning. The latest programme update shows the campaign past the halfway point of its planned length, with observations from the core itself steering where the remaining metres are spent.
Four holes and roughly 56% of planned metres
The Sakoose programme was designed at about 1,400 metres of diamond drilling. Four holes have now been completed, adding up to about 780 metres, which Richmond Hill Resources (LSE:RHR) puts at around 56% of the planned total.
A fifth hole is underway, so drilling continues while geological work on the earlier holes proceeds.
Hole 4 extended on geological grounds
Hole 4 was originally planned to a depth of about 220 metres. It was taken to about 260 metres instead, an extension of roughly 40 metres.
The decision followed visual inspection of the core and a geological review.
Rig repositioned and plan adjusted
The rig has since moved to the next site. It is now drilling the deeper of two holes planned for that area, a hole that was originally numbered as hole six in the sequence.
The shallower of those two holes has been deferred. Its metres will be reallocated.
Assays still to come
No assay results have been reported so far. Geological logging and sampling of the core continue.
For now, the Richmond Hill Resources (LSE:RHR) update is a progress report on metres drilled, depths reached and the order of holes. Grade information is not part of this release.
Understanding Diamond Drilling
Diamond drilling uses a drill bit set with industrial diamonds to cut through rock and bring up a cylinder of core, which geologists can examine directly. Because the core is a physical record of what lies beneath the surface, it allows teams to log the rock types, structures and mineralisation observed at each depth. At Sakoose, four holes totalling about 780 metres are complete, against a planned programme of about 1,400 metres, which is roughly 56% of the planned total, and a fifth hole is under way.
Why Plans Change During Drilling
Drilling programmes are designed in advance but adjusted as results come in. Hole 4 was originally planned to about 220 metres and was taken to about 260 metres after visual inspection of the core and a geological review, an extension of roughly 40 metres. Decisions of this kind are made while the rig is on site, because stopping a hole early may leave a target untested while extending one too far may use metres that could be spent elsewhere. The rig has since moved to the next site, where it is drilling the deeper of two planned holes, originally numbered hole six. The shallower of the two has been deferred and its metres will be reallocated, which shows that the programme is being managed within its planned total length.
What Has Not Yet Been Reported
No assay results have been reported. An assay is a laboratory analysis that measures the concentration of metals in a sample, and it follows geological logging and sampling of the core. Until those results are available, the update is a record of metres drilled, depths reached and the order of holes, and grade information is not part of this release. Readers following Richmond Hill Resources can therefore look for later announcements that describe assay results, the completion of the fifth hole and the use of the reallocated metres. The figures in this update provide a clear measure of progress, with about 780 of 1,400 planned metres complete, and they describe a programme that is continuing on site while laboratory work on the earlier holes proceeds.






Please wait processing your request...