Key Highlights:
- Operating profit more than doubled to £10.0m from £4.8m, a 109% rise, despite Revenue slipping 2.1% to £173.2m.
- Operating margin improved to 5.8% from 2.7%; basic EPS jumped over 80% to 17.36p.
- New Savelli moulding line at the William Lee foundry adds about 12,000 tonnes (15%) of annual capacity, the first major line Investment since 2000.
- Commercial vehicles remain about 70% of group revenue, down from 76%, as heavy-truck Demand stayed roughly 10% below trend.
- Net cash rose to £17.4m from £15.6m; ordinary Dividend held at 18.40p.
- Around 30% of revenue is tied to powertrain components exposed to eventual electrification.
The commercial-vehicle castings specialist more than doubled operating profit to £10m even as revenue slipped, crediting a leaner cost base and the first major foundry line it has installed since 2000. But truck demand remains stuck below trend.
Profit rebound built on a leaner base
Castings (LSE:CGS), the Midlands iron-founder that has supplied Europe's truck makers for more than a century, delivered a sharp rebound in profitability for the year to 31 March 2026. Reporting on 17 June, the group said operating profit more than doubled to £10.0m from £4.8m the year before, a rise of 109%. The gain came despite revenue slipping 2.1% to £173.2m, as softer heavy-truck volumes weighed on the top line. It is a striking result for a Business in one of manufacturing's least glamorous corners, and one that underlines how far cost cuts can flatter the Bottom Line even when orders are flat.
The recovery owed less to any surge in demand than to self-help. Chairman A.N. Jones told shareholders that "profitability has improved as businesses have right-sized to operate at lower demand levels", a nod to the cost discipline that lifted the group's Operating Margin to 5.8% from 2.7%. Pre-tax profit climbed to £10.3m from £5.6m, and Basic Earnings Per Share jumped more than 80% to 17.36p from 9.60p. Reported operating profit was flattered modestly by a £1.18m Research and Development expenditure credit, but the underlying trajectory was firmly upward.
A foundry first since the millennium
The headline Capital story is the new Savelli moulding line commissioned at the group's William Lee foundry in Dronfield during the final quarter — the first major foundry line investment Castings (LSE:CGS) has made since 2000. The line adds roughly 12,000 tonnes of annual capacity, an increase of about 15%, and is engineered to let the group cast larger and more complex components than its older plant could handle. For a company that prides itself on operational conservatism, it is an unusually bold commitment of capital.
Management was candid that the ramp-up has not been seamless, flagging "early-stage production inefficiencies" as the line beds in. It also disclosed a power-supply constraint imposed by Northern Powergrid that disrupted early FY2027 trading before being resolved on 24 May 2026. Even so, the investment sits at the centre of the bull case: it "opens doors to new business", management said, offering a route into wind-energy, agricultural and other non-truck castings that could gradually dilute Castings' heavy reliance on a single end-market.
Trucks still stuck below trend
That reliance remains the defining feature of the business. Commercial vehicles accounted for roughly 70% of group revenue, down from 76% the prior year, and the European heavy-truck market — Castings' core — stayed subdued. The group put demand at around 10% below its normalised trend, with 2026 registrations running near 310,000 units against the 344,000 reached at the 2023 peak. Management described volumes as "stable, but low", framing the weakness as a normalisation rather than a slump, and pointed to signs of improvement in the final quarter.
The foundry division, which does the bulk of the casting, lifted its segmental result to £6.4m from £2.9m even as external revenue edged down 2.2%; sales weight actually rose 1.2% to 41,500 tonnes. The improvement pushed the division's margin to 3.7% from 1.7% — thin by wider industrial standards, but a meaningful recovery for a high-fixed-cost foundry operating below capacity. US activity, by contrast, remained clouded by Tariff uncertainty that management expects to persist into the new year.
Machining holds its margin
The smaller machining arm saw gross revenue fall about 5% to £30.6m but improved its result to £2.4m from £2.0m, nudging its margin up to 7.8% from 6.2% — comfortably ahead of the foundry business. The group invested around £1.2m in equipment replacement there. Machining matters strategically as well as financially: taking raw castings through to finished, ready-to-fit components lets Castings capture more value per part and lock in customers who would otherwise source the finishing work elsewhere. Its large-castings operation at Scunthorpe, meanwhile, moved into profit during the period and widened its product range, a modest but tangible sign that the Diversification push beyond truck components is beginning to gain traction.
Cash, dividends and firepower
Castings entered the new year in characteristically robust financial shape. Net cash rose to £17.4m from £15.6m, helped by operating cash generation of £25.1m — roughly double the prior year's £12.3m — even after net capital spending of £13.8m. The debt-free balance sheet, management noted, leaves the group well positioned to pursue acquisitions should the right target emerge.
The board held the ordinary dividend at 18.40p — a 14.19p final plus a 4.21p interim — but declined to add a supplementary payout, having distributed a 7.00p special the year before. For a company that has historically topped up Shareholder returns when cash allows, the absence of a supplementary reads less as a signal of strain — earnings covered the ordinary payout comfortably — than as a decision to conserve firepower for the new line's ramp-up and any Acquisition ambitions.
The electric question, and what comes next
The longer-term overhang is electrification. Around 30% of revenue is tied to powertrain components that a wholesale shift to battery-electric heavy trucks could eventually erode. Castings' counter is twofold: heavy trucks sit "last on the list" for electrification, buying the group time, and the transition may open as many doors as it closes. Management points to opportunities in Hydrogen fuel cells, lighter-truck electrification and the wind-energy castings the new line is designed to accommodate — the kind of larger, more complex work that older plant could not economically produce.
For now the near-term signals are cautiously constructive. Forward customer schedules point to a 5% to 10% increase in demand across trucks, Wind Energy and agriculture, though management stopped short of issuing formal guidance and the early-year power disruption is a reminder of how quickly operational hiccups can bite a plant running near the edge of its supply. The investment case rests on a simple question: can the new capacity convert into orders quickly enough to offset a truck market that, for all its stability, is still running well below its peak? A doubling of profit off a right-sized base is a strong start; the harder task of filling a new foundry line lies ahead.




_11_18_2026_14_55_02_703826.jpg)

Please wait processing your request...